HP Storage Essentials V5.1 CLI Guide First Edition (T4283-96029, August 2006)

Installing the CLI8
9. Configure the CLI workstation to point to the management server. See ”Before Using the CLI” on
page 2.
Removing the CLI from Microsoft Windows
To remove the CLI from Microsoft Windows:
1. Go to Add/Remove Programs.
2. Select the CLI program from the list.
3. Click the Change/Remove button.
4. When you told the product is about to be uninstalled, click Uninstall.
5. When the program is done with removing the product, click Done.
The CLI is removed from Microsoft Windows.
Installing the CLI on Sun Solaris
IMPORTANT: You must have root privileges to install this software.
You are provided several installation options. One is an interactive option, which lets you select the
installation directory. Another is a silent installation, which installs with no user input. The silent
installation assumes the default installation directory. Both options install on computers with or
without X Windows.
To install the CLI on Sun Solaris:
1. Go to the /Solaris directory on the CIM Extensions CD-ROM by entering the following at the
command prompt:
# cd /cdrom/Solaris
where /cdrom is the directory where you mounted the CD-ROM.
2. To install the software, do one of the following:
IMPORTANT: If you receive a message saying there is not enough room in the temp
directory to perform the installation, set the IATEMPDIR variable to another directory. The
installation uses this directory to extract the installation files. Refer to the documentation for
your operating system for information on how to set this variable.
• Interactive Installation (Without X Windows or telnet terminal session) - You must
type -i console; otherwise, you are shown a trace back error. Enter the following at the
command prompt:
# ./InstallCLI.bin –i console
• Interactive Installation (With X Windows) - Enter the following at the command prompt:
# ./InstallCLI.bin
• Silent Installation (X Windows not required) - Enter the following at the command
prompt. Then, go to Step 6. You cannot change the installation directory.
# ./InstallCLI.bin –i silent