HP Storage Essentials V5.1 CLI Guide First Edition (T4283-96029, August 2006)

CLI Commands12

• ”Switches” on page 67

• ”Tape Libraries” on page 69

• ”Volumes” on page 71

• ”Zones” on page 73

• ”Zone Aliases” on page 79

• ”Zone Sets” on page 81

CLI Version

You can find the version of the CLI by entering the following:

• Microsoft Windows:

cli -version

• UNIX:

./cli -version

At the CLI prompt you can enter, -version or version, as shown in the following example:

CLI> -version (or) version

Applications

Use the following CLI commands for applications:

• ”appiqlist -application -all” on page 12

• ”appiqlist -application <id>” on page 12

• ”appiqlist -application -database -all” on page 13

• ”appiqlist -application -exchange -all” on page 13

• ”appiqlist -application -virtual -all” on page 13

• ”appiqshow -application <id>” on page 13

• ”appiqshow -application -all” on page 13

• ”appiqshow -application -database -all” on page 13

• ”appiqshow -application -exchange -all” on page 13

• ”appiqshow -application -virtual -all” on page 13

• ”appiqstats -application -all” on page 13

• ”appiqstats -application <id>” on page 13

appiqlist -application -all

Description: Lists short description for all the applications

appiqlist -application <id>

Description: Lists short description about the specified application identifier, where <id> is the

identifier for the application. The identifier for the application can be obtain from several methods,

such as from the appiqlist -application -all command.