HP Storage Essentials V5.1 CLI Guide First Edition (T4283-96029, August 2006)

CLI Commands36
The number after the first colon is the identifier for the element. The item after the second colon is
the World Wide Name (WWN) of the fabric or the name of the element in the fabric.
appiqlist -fabric <fabric id> -application
Description: Lists the applications in the fabric specified by <fabric id>.where <fabric id>
is the fabric identifier. The fabric identifier can be obtained from several methods, such as from the
appiqlist -fabric -all command.
Example:
C:\cli>appiqlist -fabric 1096 -application
Application:1064:straker1
Application:1125:Archer1
The number after the first colon is the identifier for the element. The item after the second colon is
the name of the element in the fabric.
appiqlist -fabric <fabric id> -host
where <fabric id> is the fabric identifier. The fabric identifier can be obtained from several
methods, such as from the appiqlist -fabric -all command.
Description: Provides a list of the hosts in the fabric specified by <fabric id>.
Example:
C:\cli>appiqlist -fabric 1096 -host
Host:1004:ufo
Host:1003:challenger
The number after the first colon is the identifier for the element. The item after the second colon is
the name of the element in the fabric.
appiqlist -fabric <fabric id> -port
where <fabric id> is the fabric identifier. The fabric identifier can be obtained from several
methods, such as from the appiqlist -fabric -all command.
Description: Provides a list of the fibre channel ports in the specified fabric.
appiqlist -fabric <fabric id> -switch
where <fabric id> is the fabric identifier. The fabric identifier can be obtained from several
methods, such as from the appiqlist -fabric -all command.
Description: Lists the switches in the fabric specified by <fabric id>.
Example:
C:\cli>appiqlist -fabric 1096 -switch
Switch:1013:QBrocade3