HP Storage Essentials V5.1 CLI Guide First Edition (T4283-96029, August 2006)

CLI Commands40
appiqshow -fabric <fabric id> -zoneset
where <fabric id> is the fabric identifier. The fabric identifier can be obtained from several
methods, such as from the appiqlist -fabric -all command.
Description: Provides a detailed description of the zone sets in the fabric specified by <fabric
id>.
appiqshow -fabric <fabric id> -zone
where <fabric id> is the fabric identifier. The fabric identifier can be obtained from several
methods, such as from the appiqlist -fabric -all command.
Description: Provides a detailed description of the zones in the fabric specified by <fabric
id>.
appiqshow -fabric <fabric id> -zonealias
where <fabric id> is the fabric identifier. The fabric identifier can be obtained from several
methods, such as from the appiqlist -fabric -all command.
Description: Provides a detailed description of the zone aliases in the fabric specified by
<fabric id>.
Hosts
Use the following types of CLI commands to obtain information about hosts:
• appiqlist - Lists hosts or components belonging to the hosts or a specified host, such as ports
and disk drives.
• appiqshow - Provides detailed information about the components belonging to the hosts or a
specified hosts.
• appiqstats - Provides statistics about a host or its components, such as a logical drive.
appiqlist -device -host -all
Description: Lists the hosts detected by the management server.
Example:
C:\cli>AppiqList -device -host -all
Host:1002:viking
Host:1003:challenger
Host:1004:ufo
Host:1058:YAMATO
Host:1069:QASERVER02
Host:1083:GROMMIT
The number after the first colon is the identifier for the element. The item after the second colon is
the name of the host.