HP Storage Essentials V5.1 CLI Guide First Edition (T4283-96029, August 2006)

CLI Commands42
Application:1064:straker1
The number 1064 is the identifier for the application and straker1 is the name of the instance for
the application. In this instance, straker1 is an Oracle instance.
appiqlist -device -host <id> -hba
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.
Description: Lists the host bust adapters connected to the host specified.
Example:
C:\cli>appiqlist -device -host 1004 -hba
HBACard:1025:Adapter 0
HBACard:1027:Adapter 1
The numbers 1025 and 1027 are the identifiers for the HBA cards.
appiqlist -device -host <id> -targetmapping
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.
Description: Lists the target mappings of the host specified.
appiqlist -device -host <id> -diskdrive
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.
Description: Lists the disk drives connected to the host specified.
appiqlist -device -host <id> -logicaldisk
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.
Description: Lists the logical drives of the host specified.
appiqlist -device -host <id> -volume
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.
Description: Lists volume manager volumes of the host specified.
appiqlist -device -host <id> -partition
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.
Description: Lists the partitions of the host specified.