HP Storage Essentials V5.1 CLI Guide First Edition (T4283-96029, August 2006)

CLI Commands48

appiqlist -device -storagesystem <ssid> -hostsecuritygroup and

appiqlist -device -storagesystem <ssid> -storageclientsettings commands.

appiqset -hostsecuritygroup <hostsecuritygroup id>

-hostmode2 <String representing HostMode2 value>

Description: Sets data for the second host mode.

where

• <hostsecuritygroup id> - is the identifier for the host security group.

• <String representing HostMode2 value> - is the string for the second host mode.

appiqdelete -hostsecuritygroup

Description: Deletes the host security group specified, where the <hostsecuritygroup id> is

the identifier for the host security group. The identifier for the host security group can be obtained

from several methods, such as from the

appiqlist -device -storagesystem <ssid> -hostsecuritygroup command.

appiqadd -hostsecuritygroup <hostsecuritygroup id>

-volume <list of volume ids> -deviceaccess

Description: Adds specified volumes to the host security group specified. The identifier for the host

security group can be obtained from several methods, such as from the

appiqlist -device -storagesystem <ssid> -hostsecuritygroup command.

where <List of access types> is list of volume access rights for each volume specified by

<list of volume ids> is a list of volume access rights for each volume specified by

<list of volume ids>. You must provide one of the following access types (numbers) for each

volume specified:

• 0: Unknown Access

• 2: Read Write

• 3: Read-Only

• 4: No Access

appiqadd -hostsecuritygroup <host security group

id> - initiator <list of hba port ids>

Description: Adds specified initiator WWNs to the host security group specified.

where:

• <host security group id> is the identifier for the host security group. The identifier for

the host security group can be obtained from several methods, such as from the

appiqlist -device -storagesystem <ssid> -hostsecuritygroup command.