HP Storage Essentials V5.1 CLI Guide First Edition (T4283-96029, August 2006)

Storage Essentials 5.1 CLI Guide 49
• <list of host port ids> - it is the HBA port ID or initiator for the host. The HBA port ID
can be obtain from several methods, such as from the
appiqlist –device –host <host id> -port command.
appiqremove -hostsecuritygroup <host security
group id> -volume <list of volume ids>
Description: Removes specified volumes from the protocol controller specified.
where:
• <host security group id> is the identifier for the host security group. The identifier for
the host security group can be obtained from several methods, such as from the
appiqlist -device -storagesystem <ssid> -hostsecuritygroup command.
• <list of volume ids> - is a list of storage system volume IDs. The list of volume IDs can be
obtained from several methods, such as from the
appiqshow -hostsecuritygroup <hostsecuritygroup id> -volume command.
appiqremove -hostsecuritygroup <host security
group id> - initiator <list of hba port ids>
Description: Removes specified initiator WWNs from the protocol controller specified.
where:
• <host security group id> is the identifier for the host security group. The identifier for
the host security group can be obtained from several methods, such as from the
appiqlist -device -storagesystem <ssid> -hostsecuritygroup command.
• <list of host port ids> - it is the HBA port ID or initiator for the host. The HBA port ID
can be obtain from several methods, such as from the
appiqlist –device –host <host id> -port command.
appiqcreate -hostsecuritygroup <storage system
id> -initiator <list of host port wwns | list of host port
Ids> [-name <name>]
Description: Creates a host security group with the specified list of initiators (host ports) and with
the given name.
where:
• <storage system id> - The storage system identifier can be obtained from several
methods, such as from the appiqlist -device -storagesystem -all command.
• <list of host port wwns | list of host port Ids> - is a list of host ports
(initiators). You can give either the port ID or its 16 digit world wide name (WWN). You can
obtain the host port ID or its WWN from several methods, such as from the following
command: appiqlist –device –host <host id> -port
• <Name> (optional) is the name you specify for the host security group