HP Storage Essentials V5.1 CLI Guide First Edition (T4283-96029, August 2006)

Storage Essentials 5.1 CLI Guide 51
• 2: Read Write
• 3: Read-Only
•4: No Access
• <Name> (optional) is the name you specify for the host security group
Adding a list of initiator, volumes or storagesystem ports to a host security group (HSG) is specific
to the storage system. Some storage system may not support adding more than one volume or
initiator to the same HSG. Some storage systems may not support adding same volume to more
than one HSG. You can obtain information about HSGs from the following command:
Appiqshow -device -storagesystem <storagesystem id> -maskingcapabilities
NetApp NAS Devices
Use the following CLI commands to show details for NetApp NAS devices:
appiqlist -device -nashost -all
Description: Provides a list of all NAS hosts.
appiqlist -device -nashost <id>
Description: Provides a list of all NAS hosts matching with id.
appiqlist -device -nashost <id> -all
Description: Provides a list of a NAS host elements.
appiqlist -device -nashost <id> -volume
Description: Provides a list of all the volumes of a NAS host.
appiqlist -device -nashost <id> -volume <id> -quota
Description: Provides a list of the entire quotas for a volume of a NAS host.
appiqlist -device -nashost <id> -volume <id>
-snapshot
Description: Provides a list of all snapshots for a volume of a NAS host.
appiqlist -device -nashost <id> -volume <id> -share
Description: Provides a list of all shares for a volume of a NAS host.
appiqlist -device -nashost <id> -volume <id> -qtree
Description: Provides a list of all qtrees for a volume of a NAS host.
appiqlist -device -nashost <id> -diskdrive
Description: Provides a list of all disk drives of a NAS host.