HP Storage Essentials V5.1 CLI Guide First Edition (T4283-96029, August 2006)

CLI Commands64
appiqlist -device -storagesystem <ssid>
-mappedvolume
where <ssid> is the identifier for a storage system. The storage system identifier can be found
through several methods, such as from the appiqlist -device -storagesystem -all
command.
Description: Lists the mapped volumes for the storage system specified.
appiqlist -device -storagesystem <ssid>
-storageclientsettings
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
Description: Lists of the storage client settings for the storage system specified.
appiqshow -device -storagesystem -all
Description: Provides a detailed description of the storage systems detected by the management
server.
appiqshow -device -storagesystem <ssid>
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
To view volume information for HiCommand storage systems, use the AppIQShow -device
-storagesystem <ssid> -unmappedvolume and AppIQShow -device
-storagesystem <ssid> -mappedvolume commands. See the topic, ”Volumes” on page 71
for more information.
Description: Provides a detailed description of the specified storage system, such as, the
controller port identifiers for the storage system specified, not the actual ports.
appiqshow -device -storagesystem <ssid> -all
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
Description: Provides a detailed description of the components of the storage system specified.
appiqshow -device -storagesystem <ssid> -port
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
Description: Provides a detailed description of the ports for the storage system specified.
appiqshow -device -storagesystem <ssid> -lun
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
Description: Provides a detailed description of the LUNs for the storage system specified.