HP Storage Essentials V5.1 CLI Guide First Edition (T4283-96029, August 2006)

CLI Commands68
appiqlist -device -switch <switch id> -port
where <switch id> is the switch identifier. The switch identifier can be obtained from several
methods, such as from the appiqlist -device -switch -all command.
Description: Provides information about the ports on the specified switch.
appiqlist -device -switch <switch id> -zonealias
where <switch id> is the switch identifier. The switch identifier can be obtained from several
methods, such as from the appiqlist -device -switch -all command.
Description: Provides information about zone aliases on the specified switch.
appiqlist -device -switch <switch id> -zone
where <switch id> is the switch identifier. The switch identifier can be obtained from several
methods, such as from the appiqlist -device -switch -all command.
Description: Provides information about zones on the specified switch.
appiqlist -device -switch <switch id> -zoneset
where <switch id> is the switch identifier. The switch identifier can be obtained from several
methods, such as from the appiqlist -device -switch -all command.
Description: Provides information about zone sets on the specified switch.
appiqshow -device -switch -all
Description: Provides detailed information about the switches detected by the management
server.
appiqshow -device -switch <switch id>
where <switch id> is the switch identifier. The switch identifier can be obtained from several
methods, such as from the appiqlist -device -switch -all command.
Description: Provides detailed information about the specified switch.
appiqshow -device -switch <switch id> -all
where <switch id> is the switch identifier. The switch identifier can be obtained from several
methods, such as from the appiqlist -device -switch -all command.
Description: Provides detailed information about the specified switch and the sub elements of the
switch, such as ports, zones, zone aliases and zone sets.
appiqshow -device -switch <switch id> -port
where <switch id> is the switch identifier. The switch identifier can be obtained from several
methods, such as from the appiqlist -device -switch -all command.
Description: Provides detailed information about the ports on the specified switch.