HP Storage Essentials V5.1 CLI Guide First Edition (T4283-96029, August 2006)

Storage Essentials 5.1 CLI Guide 69
appiqshow -device -switch <switch id> -zone
where <switch id> is the switch identifier. The switch identifier can be obtained from several
methods, such as from the appiqlist -device -switch -all command.
Description: Provides detailed information of zones in the switch fabric.
appiqshow -device -switch <switch id> -zoneset
where <switch id> is the switch identifier. The switch identifier can be obtained from several
methods, such as from the appiqlist -device -switch -all command.
Description: Provides detailed information of zone sets in the switch fabric.
appiqshow -device -switch <switch id> -zonealias
where <switch id> is the switch identifier. The switch identifier can be obtained from several
methods, such as from the appiqlist -device -switch -all command.
Description: Provides detailed information of zone aliases in the switch fabric.
appiqstats -device -switch -all
Description: Provides statistical information about all switches
appiqstats -device -switch <switch id>
where <switch id> is the switch identifier. The switch identifier can be obtained from several
methods, such as from the appiqlist -device -switch -all command.
Description: Provides statical information about a specified switch.
Tape Libraries
Use the following types of CLI commands to obtain information about tape libraries:
• appiqlist - Lists information about the components of the tape libraries
• appiqshow - Provides a detailed description of the components in the tape libraries
appiqlist -device -tapelibrary -all
Description: Provide a list of all the tape libraries that the management server detects.
appiqlist -device -tapelibrary <library ID>
where <library id> is the identifier for the tape library. The identifier for the tape library can be
obtained from several methods, such as from the appiqlist -device -tapelibrary -all
command.
Description: Provides the name of the specified tape library.
appiqlist -device -tapelibrary <library ID> -all
where <library id> is the identifier for the tape library. The identifier for the tape library can be
obtained from several methods, such as from the appiqlist -device -tapelibrary -all
command.