HP Storage Essentials V5.00.01 CLI guide (T4283-96015, January 2006)

Storage Essentials 5.00.01 CLI Guide 7
2 Installing the CLI
This chapter describes the following:
• ”Installing the CLI on Microsoft Windows” on page 7
• ”Installing the CLI on Sun Solaris” on page 8
• ”Installing the CLI on IBM AIX” on page 9
• ”Upgrading the CLI” on page 10
• ”Removing the CLI from UNIX” on page 10
Keep in mind:
• Install the CLI on a remote server that can access the management server.
• If you have a previous version of the CLI, you must upgrade it to match the current version of the
management server. See ”Upgrading the CLI” on page 10 for more information.
Installing the CLI on Microsoft Windows
To install the CLI on Microsoft Windows:
1. Go to the Windows directory on the CIM Extension CD-ROM.
2. Double-click InstallCLI.exe.
When you see the introduction screen, click Next.
3. When you are asked for an installation directory, you can select the default or choose your own.
To choose your own directory, click the Choose button. You can always display the default
directory by clicking the Restore Default Folder button.
When you are done, click Next.
4. Read the notes, such quitting all programs before running the installation. Click Next.
5. Check the pre-installation summary. You are shown the following:
•Product Name
• Installation Folder
• Disk Space Required
• Disk Space Available
6. Do one of the following:
•Click Install if you agree with the pre-installation summary.
•Click Previous if you want to modify your selections.
The CLI is installed.
7. When you have been told the installation has been successful, click Done to quit the installation.
8. Go to the following directory:
C:\
hp\CLI\bin
9. Configure the CLI workstation to point to the management server. See ”Before Using the CLI” on
page 2.