HP Storage Essentials V5.00.01 CLI guide (T4283-96015, January 2006)

CLI Commands12
• ”Zones” on page 69
• ”Zone Aliases” on page 74
• ”Zone Sets” on page 76
CLI Version
You can find the version of the CLI by entering the following:
• Microsoft Windows:
cli -version
• UNIX:
./cli -version
At the CLI prompt you can enter, -version or version, as shown in the following example:
CLI> -version (or) version
Applications
Use the following CLI commands for applications:
• ”appiqlist -application -all” on page 12
• ”appiqlist -application <id>” on page 12
• ”appiqlist -application -database -all” on page 12
• ”appiqlist -application -exchange -all” on page 13
• ”appiqlist -application -virtual -all” on page 13
• ”appiqshow -application <id>” on page 13
• ”appiqshow -application -all” on page 13
• ”appiqshow -application -database -all” on page 13
• ”appiqshow -application -exchange -all” on page 13
• ”appiqshow -application -virtual -all” on page 13
• ”appiqstats -application -all” on page 13
• ”appiqstats -application <id>” on page 13
appiqlist -application -all
Description: Lists short description for all the applications
appiqlist -application <id>
Description: Lists short description about the specified application identifier, where <id> is the
identifier for the application. The identifier for the application can be obtain from several methods,
such as from the appiqlist -application -all command.
appiqlist -application -database -all
Description: Lists all the database applications.