HP Storage Essentials V5.00.01 CLI guide (T4283-96015, January 2006)

Storage Essentials 5.00.01 CLI Guide 53
Storage Pools
Use the CLI commands in this section to manage storage pools.
appiqlist -pool <pool id>
Description: Provides the name of a specific storage pool. The pool ID can be obtained from
several methods, such as from the appiqlist -device -storagesystem <storage
system id> -pool command.
appiqlist -pool <pool id> -volume
Description: Provides list of volumes on storage pool specified. The pool ID can be obtained from
several methods, such as from the appiqlist -device -storagesystem <storage
system id> -pool command.
appiqlist -pool <pool id> -storageextent
Description: Provides list of storage extents on storage pool specified. The pool ID can be
obtained from several methods, such as from the appiqlist -device -storagesystem
<storage system id> -pool command.
appiqlist -pool <pool id> -storagesetting
Description: Provides a list of storage settings for the pool specified:
Keep in mind the following:
• For a parent pool (unconfigured pool), the storage settings provided from this command are
used in the creation of a pool.
• For a non-parent pool, the storage settings provided from this command are used in volume
creation.
The pool ID can be obtained from several methods, such as from the appiqlist -device
-storagesystem <storage system id> -pool command.
appiqshow -pool <pool id>
Description: Provides a detailed description of pool. The pool ID can be obtained from several
methods, such as from the appiqlist -device -storagesystem <storage system id>
-pool command.
appiqshow -pool <pool id> -storagesetting
Description: Provides a detailed list of storage settings for this pool.
Keep in mind the following:
• For a parent pool (unconfigured pool), these settings are used in the creation of a pool.
• For a non-parent pool, these settings are used in volume creation.
The pool ID can be obtained from several methods, such as from the appiqlist -device
-storagesystem <storage system id> -pool command.