HP Storage Essentials V5.00.01 CLI guide (T4283-96015, January 2006)

CLI Commands60
Description: Lists of the storage client settings for the storage system specified.
appiqshow -device -storagesystem -all
Description: Provides a detailed description of the storage systems detected by the management
server.
appiqshow -device -storagesystem <ssid>
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
To view volume information for HiCommand storage systems, use the AppIQShow -device
-storagesystem <ssid> -unmappedvolume and AppIQShow -device
-storagesystem <ssid> -mappedvolume commands. See the topic, ”Volumes” on page 67
for more information.
Description: Provides a detailed description of the specified storage system, such as, the controller
port identifiers for the storage system specified, not the actual ports.
appiqshow -device -storagesystem <ssid> -all
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
Description: Provides a detailed description of the components of the storage system specified.
appiqshow -device -storagesystem <ssid> -port
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
Description: Provides a detailed description of the ports for the storage system specified.
appiqshow -device -storagesystem <ssid> -lun
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
Description: Provides a detailed description of the LUNs for the storage system specified.
appiqshow -device -storagesystem <ssid> -pool
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
Description: Provides a detailed description of the storage pools for the storage system specified.
appiqshow -device -storagesystem <ssid> -volume
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
To view volume information for HiCommand storage systems, use the AppIQShow -device
-storagesystem <ssid> -unmappedvolume and AppIQShow -device
-storagesystem <ssid> -mappedvolume commands. See the topic, ”Volumes” on page 67
for more information.