HP Storage Essentials V5.00.01 CLI guide (T4283-96015, January 2006)

CLI Commands64
appiqlist -device -switch <switch id> -zoneset
where <switch id> is the switch identifier. The switch identifier can be obtained from several
methods, such as from the appiqlist -device -switch -all command.
Description: Provides information about zone sets on the specified switch.
appiqshow -device -switch -all
Description: Provides detailed information about the switches detected by the management server.
appiqshow -device -switch <switch id>
where <switch id> is the switch identifier. The switch identifier can be obtained from several
methods, such as from the appiqlist -device -switch -all command.
Description: Provides detailed information about the specified switch.
appiqshow -device -switch <switch id> -all
where <switch id> is the switch identifier. The switch identifier can be obtained from several
methods, such as from the appiqlist -device -switch -all command.
Description: Provides detailed information about the specified switch and the sub elements of the
switch, such as ports, zones, zone aliases and zone sets.
appiqshow -device -switch <switch id> -port
where <switch id> is the switch identifier. The switch identifier can be obtained from several
methods, such as from the appiqlist -device -switch -all command.
Description: Provides detailed information about the ports on the specified switch.
appiqshow -device -switch <switch id> -zone
where <switch id> is the switch identifier. The switch identifier can be obtained from several
methods, such as from the appiqlist -device -switch -all command.
Description: Provides detailed information of zones in the switch fabric.
appiqshow -device -switch <switch id> -zoneset
where <switch id> is the switch identifier. The switch identifier can be obtained from several
methods, such as from the appiqlist -device -switch -all command.
Description: Provides detailed information of zone sets in the switch fabric.
appiqshow -device -switch <switch id> -zonealias
where <switch id> is the switch identifier. The switch identifier can be obtained from several
methods, such as from the appiqlist -device -switch -all command.
Description: Provides detailed information of zone aliases in the switch fabric.
appiqstats -device -switch -all
Description: Provides statistical information about all switches