HP Storage Essentials V5.00.01 CLI guide (T4283-96015, January 2006)

CLI Commands66
appiqlist -device -tapelibrary <library ID> -controller
where <library id> is the identifier for the tape library. The identifier for the tape library can be
obtained from several methods, such as from the appiqlist -device -tapelibrary -all
command.
Description: Provides a list of all front-end controller cards that belongs to the specified tape
library.
appiqlist -device -tapelibrary <library ID>
-changerdevice
where <library id> is the identifier for the tape library. The identifier for the tape library can be
obtained from several methods, such as from the appiqlist -device -tapelibrary -all
command.
Description: Provides a list of all changer devices that belongs to the specified tape library.
appiqshow -device -tapelibrary -all
where <library id> is the identifier for the tape library. The identifier for the tape library can be
obtained from several methods, such as from the appiqlist -device -tapelibrary -all
command.
Description: Provide a detailed description of all the tape libraries that the management server
detects.
appiqshow -device -tapelibrary <library ID>
where <library id> is the identifier for the tape library. The identifier for the tape library can be
obtained from several methods, such as from the appiqlist -device -tapelibrary -all
command.
Description: Provides a detailed description for a specified tape library.
appiqshow -device -tapelibrary <library ID> -all
where <library id> is the identifier for the tape library. The identifier for the tape library can be
obtained from several methods, such as from the appiqlist -device -tapelibrary -all
command.
Description: Provides a detailed description of all subcomponents, for example, port, media
access device, controller and changerdevice) that belongs to the specified tape library.
appiqshow -device -tapelibrary <library ID> -port
where <library id> is the identifier for the tape library. The identifier for the tape library can be
obtained from several methods, such as from the appiqlist -device -tapelibrary -all
command.
Description: Provides a detailed description of all fibre channel ports that belongs to the specified
tape library.