HP Storage Essentials V5.00.01 installation guide (T4283-96011, January 2006)

Storage Essentials 5.00.01 Installation Guide 141
QLogic SNIA Adapters comes from package qlapi-vX.XXX-rel.tgz found in the QLogic driver. The
adapters are installed separately after driver. To view the location of the library, enter the following
at the command prompt:
# more /etc/hba.conf
The following is displayed:
qla2x00 /usr/lib/libqlsdm.so
Driver Information for Verifying QLogic SNIA
Adapters on SUSE Linux
QLogic SNIA Adapters comes from package qlapi-vX.XXX-rel.tgz found in the QLogic driver. The
adapters are installed separately after driver. To view the location of the library, enter the following
at the command prompt:
# more /etc/hba.conf
The following is displayed:
qla2x00 /usr/lib/libqlsdm.so
Installing the CIM Extension
Keep in mind the following:
• The instructions in this section apply if you are doing a local installation of the CIM Extension, as
compared to a scripted or push installation. If you want to perform a scripted or push installation
of the CIM Extension, first install the CIM Extension locally by using the instructions in this
section. Then, perform the scripted or push installation. The instructions in this section only need
to be performed once if you are doing a scripted or push installation. Contact customer support
for information about performing a scripted or push installation.
To install the CIM Extension:
1. Login as root.
2. Go to the Linux directory on the CIM Extension CD-ROM by entering the following at the
command prompt:
# cd /cdrom/linux
where /cdrom is the name of the CD-ROM drive
3. Enter the following at the command prompt:
# rpm -idvh APPQcime.rpm
The output is the following:
Preparing... ########################################### [100%]
1:APPQcime ########################################### [100%]
The installation is done when you are returned to the command prompt.
Starting the CIM Extension Manually
The management server can only obtain information from this host when the CIM Extension is
running.