HP Storage Essentials V5.00.01 installation guide (T4283-96011, January 2006)
Table Of Contents
- HP
- Storage Essentials 5.00.01 Installation Guide
- Contents
- Overview
- Installing the Management Server on Microsoft Windows
- Discovering Filers, Tape Libraries, Switches and Storage Systems
- Deploying CIM Extensions
- Installing the CIM Extension for IBM AIX
- Installing the CIM Extension for SGI ProPack for Linux
- Installing the CIM Extension for HP-UX
- Installing the CIM Extension for SUSE and Red Hat Linux
- Installing the CIM Extension for OpenVMS
- Installing the CIM Extension for HP Tru64 UNIX
- Installing the CIM Extension for SGI IRIX
- Installing the CIM Extension for Sun Solaris
- Installing the CIM Extension for Microsoft Windows
- Discovering Applications, Backup Servers and Hosts
- Managing Security
- Troubleshooting
Installing the CIM Extension for OpenVMS148
$ prod sh prod/full
• OpenVMS 7.3.2 (Alpha)
OpenVMS (Alpha) 8.2 is also supported. The requirements for OpenVMS 8.2 are listed later
in this Prerequisites section.
• Mandatory ECOs for OpenVMS 7.3.2 (Alpha):
• DEC-AXPVMS-VMS732_PCSI-V0100
• DEC-AXPVMS-VMS732_UPDATE-V0400
• DEC-AXPVMS-VMS732_SYS-V0700
• DEC-AXPVMS-VMS732_FIBRE_SCSI-V0700 (Note that the FC SNIA HBA API
software is bundled with the fibre_scsi patch.)
• Optional ECO:
VMS732_ACRTL-V0100
The optional ECO is recommended if your application uses files exclusively on an ODS-5
volume and your system has the latest C RTL ECO. The ECO lets you reduce the overhead of
file name mapping. Whenever you eliminate a file name mapping option, you reduce the
number of internal buffers that need to be allocated resulting in a smaller memory footprint
for your application.
NOTE: VMS732_PCSI-V0100 and VMS732_UPDATE-V0400 need to be installed prior to
the installation of VMS732_SYS-V0700 followed by installation of
VMS732_FIBRE_SCSI-V0700. A reboot is required after the installation.
• OpenVMS 8.2 (Alpha)
Upgraded to the following required patch level:
DEC-AXPVMS-VMS82A_FIBRE_SCSI-V0100
The CIM Extension for OpenVMS is compatible with OpenVMS 7.3.2 (Alpha) and OpenVMS
8.2 (Alpha). The requirements for OpenVMS 7.3-2 are listed earlier in this Prerequisites section.
• 60 MB of free disk space
• Open network port
By default, the CIM Extension uses port 4673 to communicate with the management server.
Verify the network port is open. If you need to use a different port, see ”Temporarily Changing
the Port Number” on page 152.
• SNIA HBA API Support
The management server is only compatible with host bus adapters (HBAs) that support the SNIA
HBA API. The SNIA HBA API support for OpenVMS (Alpha) 7.3-2 and 8.2 is part of the
FIBRE_SCSI ECO kits listed above: DEC-AXPVMS-VMS732_FIBRE_SCSI-V0700 for
OpenVMS (Alpha) 7.3-2 and DEC-AXPVMS-VMS82A_FIBRE_SCSI-V0100 for OpenVMS
(Alpha) 8.2.