HP Storage Essentials V5.00.01 installation guide (T4283-96011, January 2006)

Storage Essentials 5.00.01 Installation Guide 193
14 Discovering Applications, Backup Servers and Hosts
IMPORTANT: Information about Systems Insight Manager (SIM), such as discovery instructions, are
for SIM version 5.0.
This chapter describes the following:
• ”Step 1 - Discovering Your Hosts and Master Backup Servers” on page 193
• ”Step 2 - Setting Up Discovery for Applications” on page 202
• ”Step 3 - Discovering Applications” on page 216
• ”Changing the Oracle TNS Listener Port” on page 220
• ”Adding/Modifying Microsoft Exchange Domain Controller Access” on page 221
• ”Changing the Password for the Managed Database Account” on page 222
• ”Obtaining Disk Drive Statistics from Engenio Storage Systems” on page 222
• ”Assigning a File Extension in Netscape 7” on page 223
Step 1 - Discovering Your Hosts and Master Backup Servers
Before you can discover your applications, you must discover their hosts. You discover hosts in the
same way you discovered your switches and storage systems. You provide the host’s IP address, user
name and password. The user name and password must have administrative privileges. Unlike
switches and storage systems, you must have installed CIM Extension on the host if you want to
obtain detailed information about the host and its applications, including those applications for
backup. Refer to the support matrix for information about which backup applications the
management server supports.
The management server also detects the backup applications its supports, such as Veritas™
NetBackup™. If you are licensed for Backup Manager and you want to manage and monitor your
backup applications, select Include backup details when you Get Details or Discovery Data
Collection, as described in ”Step E - Obtain Details” on page 201.
Keep in mind the following:
• Additional steps are required for monitoring backup applications on HP-UX and Linux. You must
configure the jboss.properties file in the following directory on the management server, as
described in ”Step A - Configure the jboss.properties File for Backup Servers” on page 194:
%JBOSS4_DIST%\server\
appiq\conf
• (Discovery from HP SE only)If you change the password of a host after you discover it, you must
change the password for the host in the discovery list. Then, you must stop and restart the CIM
Extension running on that host.
• (Discovery from HP SIM only)If you update the System Protocol Settings for that host in HP SIM,
the information for the new user name and password is sent to HP SE when an identification step
occurs in HP SIM.