HP Storage Essentials V5.1 User Guide First Edition (T4283-96026, August 2006)

Storage Essentials 5.1 User Guide 71
• IP address of the server containing the HP CIMOM
The following should be installed on a server before you discover an HP XP storage system if you
are discovering the storage system by using Command View XP:
• HP Storage Management Appliance software
• HP OpenView Storage Operations Manager
• HP StorageWorks Command View XP
Discovery from HP SIM by Using Command View XP
To discover HP storage systems by using Command View XP, provide the following information in
HP Insight Manager:
• IP address or system name of the HP CIMOM you want to discover. See ”Adding an IP Range
for Scanning” on page 24 or ”Adding a Single IP Address or DNS Name for Discovery” on
page 25 for more information.
• User name for accessing the HP CIMOM
• Password for accessing HP CIMOM.
If you have Command View version 2.0 or later, the default password is administrator. If you
have Command View earlier than version 2.0, refer to the documentation that shipped with
Command View for the default password.
Discovery from HP SE by Using Command View XP
To discover HP storage systems by using Command View XP:
1. Click Tools > Storage Essentials > Home on the HP SIM home page menu. The HP SE home
page opens in a separate web browser window. Click Discovery > Setup in the upper-right
pane of the HP SE home page window.
2. Select Step 1 at the top of the page.
3. Click the IP Addresses tab.
4. Click the Add Address button.
5. In the IP Address/DNS Name field, type the IP address or DNS name of the HP CIMOM you
want to discover.
6. Enter the User Name used to access the HP CIMOM.
7. Enter the Password used to access the HP CIMOM.
If you have Command View version 2.0 or later, the default password is administrator. If you
have Command View earlier than version 2.0, refer to the documentation that shipped with
Command View for the default password.
8. If you typed a password in the previous step, retype the password in the Verify Password
field.
9. In the Comment field (optional), type a comment for additional information. The information
typed into this field is displayed under the Comment column in the Addresses to Discover list
(Tools > Storage Essentials > Home > Discovery > Setup).
10.Do not select the Do Not Authenticate option.
11.Click OK.