HP Storage Essentials V5.00.01 installation guide (T4283-96011, January 2006)

Storage Essentials 5.00.01 Installation Guide 119
• bos.rte.libc 5.3.0.0* - This is required for Java 1.4 support.
• xlC.rte 6.0.0.0* - The C++ runtime.
*Go to the IBM Technical Support Web site at the following URL to obtain information about
obtaining these file:
https://techsupport.services.ibm.com
On the Web page do the following:
1. Under the Refine Your Search Section select Tools/Utilities from the Limit by Type
drop-down menu.
2. Select AIX from the Limit by Platform or Operating System drop-down menu.
3. Select 5.0 from the Limit by Version drop-down menu.
4. In the Limit by Adding Search terms field, type the following:
Download the VisualAge C++ for AIX V5 Runtime libraries
5. Install the xlC.rte file set, not the .rte file for AIX 4.x.
Rolling Over the Logs
The logging information for the CIM Extension is contained primarily in the cxws.log file. The
cxws.log files roll over once the files become more than 30 MB. The information in cxws.log is
moved to cxws.log.1. If cxws.log.1, already exists, cxws.log.2 is created. The numbering for the
files continues sequentially, for example, cxws.log.3, cxws.log.4, etc.
The cxws.out file contains some logging information, such as the CIM Extension starting, which is
recorded in case something unexpected happens with the Java Virtual Machine. The cxws.out file is
rewritten each time the CIM Extension restarts.
Removing the CIM Extension from AIX
Make sure “preview” is set to “No”. Refer to your documentation for AIX for more information.
To remove the CIM Extension for AIX:
1. Stop the CIM Extension as mentioned in ”Stopping the CIM Extension” on page 117.
2. Type the following at the command prompt:
# smit -C
3. Select Software Installation and Maintenance.
4. Select Software Maintenance and Utilities.
5. Select Remove Installed Software.
6. In the SOFTWARE name, press F+Esc and select:
APPQcime CIM Extensions
7. On the same page you selected APPQcime CIM Extensions, select “No” for Preview by
pressing the tab key.
8. Press ENTER to remove the software.