HP Storage Essentials V5.00.01 installation guide (T4283-96011, January 2006)
Table Of Contents
- HP
- Storage Essentials 5.00.01 Installation Guide
- Contents
- Overview
- Installing the Management Server on Microsoft Windows
- Discovering Filers, Tape Libraries, Switches and Storage Systems
- Deploying CIM Extensions
- Installing the CIM Extension for IBM AIX
- Installing the CIM Extension for SGI ProPack for Linux
- Installing the CIM Extension for HP-UX
- Installing the CIM Extension for SUSE and Red Hat Linux
- Installing the CIM Extension for OpenVMS
- Installing the CIM Extension for HP Tru64 UNIX
- Installing the CIM Extension for SGI IRIX
- Installing the CIM Extension for Sun Solaris
- Installing the CIM Extension for Microsoft Windows
- Discovering Applications, Backup Servers and Hosts
- Managing Security
- Troubleshooting
Installing the CIM Extension for HP-UX130
HP-UX 11i
Driver Bundle Version
B.11.11.09 PCI/HSC FibreChannel;Supptd HW=A6684A,A6685A,A5158A,A6795A
(FibrChanl-00 Bundle).
This driver Bundle is automatically selected for installation with the HP-UX 11i Operating
Environments.
Driver Version = @(#) PATCH_11.11: libtd.a : Jun 28 2002, 11:08:35, PHSS_26799 or later
Driver Patch
Tachyon Fibre Channel Driver Patch: PHKL_23626 or later (only for HP-UX 11i)
HP-UX 11.0
Driver Bundle Versions
B.11.00.10 PCI Tachyon TL/TS Fibre Channel (Bundle A5158A).
B.11.00.10 PCI Tachyon TL/TS/XL2 Fibre Channel (Bundle A6795A)
Driver Version = @(#) PATCH_11.00: libtd.a : Jul 15 2002, 11:34:12, PHSS_26798
Driver Patch
Tachyon Fibre Channel Driver Patch: PHKL_23939 or later (only for HP-UX 11.00)
Required Disk Space
The CIM Extension for HP-UX requires 105 MB.
Network Port Must Be Open
The CIM Extension uses port 4673 by default to communicate with the management server. Verify
the network port is open. Refer to the documentation accompanying your HP-UX host for more
information. If you need to use a different port, see ”Permanently Changing the Port a CIM
Extension Uses (UNIX Only)” on page 249.
Verifying SNIA HBA API Support
The management server can only talk to host bus adapters (HBAs) that support the SNIA HBA API.
You can run the hbatest program, which is accessible from the CIM Extension CD-ROM. The
program, hbatest, lists the name and number for all HBA’s that support the SNIA HBA API. In some
instances hbatest may report it cannot find an HBA driver even though an HBA driver is installed.
Try installing a different version of the HBA driver that is SNIA compliant.
To run hbatest:
1. Go to the HPUX/tools directory on the CIM Extension CD-ROM.
2. Enter the following at the command prompt: ./hbatest
The program runs its diagnostics.