HP Storage Essentials V5.00.01 installation guide (T4283-96011, January 2006)

Installing the CIM Extension for OpenVMS148
$ prod sh prod/full
OpenVMS 7.3.2 (Alpha)
OpenVMS (Alpha) 8.2 is also supported. The requirements for OpenVMS 8.2 are listed later
in this Prerequisites section.
Mandatory ECOs for OpenVMS 7.3.2 (Alpha):
DEC-AXPVMS-VMS732_PCSI-V0100
DEC-AXPVMS-VMS732_UPDATE-V0400
DEC-AXPVMS-VMS732_SYS-V0700
DEC-AXPVMS-VMS732_FIBRE_SCSI-V0700 (Note that the FC SNIA HBA API
software is bundled with the fibre_scsi patch.)
Optional ECO:
VMS732_ACRTL-V0100
The optional ECO is recommended if your application uses files exclusively on an ODS-5
volume and your system has the latest C RTL ECO. The ECO lets you reduce the overhead of
file name mapping. Whenever you eliminate a file name mapping option, you reduce the
number of internal buffers that need to be allocated resulting in a smaller memory footprint
for your application.
NOTE: VMS732_PCSI-V0100 and VMS732_UPDATE-V0400 need to be installed prior to
the installation of VMS732_SYS-V0700 followed by installation of
VMS732_FIBRE_SCSI-V0700. A reboot is required after the installation.
OpenVMS 8.2 (Alpha)
Upgraded to the following required patch level:
DEC-AXPVMS-VMS82A_FIBRE_SCSI-V0100
The CIM Extension for OpenVMS is compatible with OpenVMS 7.3.2 (Alpha) and OpenVMS
8.2 (Alpha). The requirements for OpenVMS 7.3-2 are listed earlier in this Prerequisites section.
60 MB of free disk space
Open network port
By default, the CIM Extension uses port 4673 to communicate with the management server.
Verify the network port is open. If you need to use a different port, see ”Temporarily Changing
the Port Number” on page 152.
SNIA HBA API Support
The management server is only compatible with host bus adapters (HBAs) that support the SNIA
HBA API. The SNIA HBA API support for OpenVMS (Alpha) 7.3-2 and 8.2 is part of the
FIBRE_SCSI ECO kits listed above: DEC-AXPVMS-VMS732_FIBRE_SCSI-V0700 for
OpenVMS (Alpha) 7.3-2 and DEC-AXPVMS-VMS82A_FIBRE_SCSI-V0100 for OpenVMS
(Alpha) 8.2.