HP Storage Essentials V5.00.01 installation guide (T4283-96011, January 2006)

Installing the CIM Extension for SGI IRIX168
Verifying SNIA HBA API Support
The management server can only talk to host bus adapters (HBAs) that support the SNIA HBA API.
You can run the hbatest program, which is accessible from the CIM Extension CD-ROM. The
program, hbatest, lists the name and number for all HBA's that support the SNIA HBA API. In some
instances hbatest may report it cannot find an HBA driver even though an HBA driver is installed.
Try installing a different version of the HBA driver that is SNIA compliant.
1. Go to the Irix/tools directory on the CIM Extension CD-ROM.
2. Enter the following at the command prompt: ./hbatest
The program runs its diagnostics.
SGI Branded QLogic SNIA Adapters are built into the operating system kernel starting with IRIX
6.5.22 and later. To find the library, enter the following at the command prompt:
# ls
The following is displayed:
/usr/include/sys/hba_api.h
Installing the CIM Extension
To install the CIM Extension for IRIX:
1. Insert the CIM Extensions CD-ROM into the CD-ROM drive.
2. Go to the CD-ROM by entering the following at the command prompt:
cd /CDROM
3. Enter the following at the command prompt:
inst
4. Enter the following at the Inst command prompt:
Inst> open
5. When you are asked for the location of the installation, enter the following:
Inst> /CDROM/Irix
6. Enter the following:
Inst> install
7. When asked which subsystem, enter the following:
APPQcime
8. To begin the installation, enter the following:
Inst> go
The IRIX CIM Extension is installed in the /opt/APPQcime directory.
9. Enter the following to restart the ELF files and to exit the installation program:
Inst> quit
You must start the CIM Extension for the management server to obtain information about the
host. See ”Starting the CIM Extension” on page 169