HP Storage Essentials V5.00.01 installation guide (T4283-96011, January 2006)

Storage Essentials 5.00.01 Installation Guide 173
1. Open S99appqcime in a text editor.
2. Find the following line of code:
${APPIQ_HOME}/tools/start
3. Add the parameter after /start. For example, assume you want to change the port for the CIM
Extension to port 1234. You would add -port 1234 after /start, as shown in the following
example:
${APPIQ_HOME}/tools/start -port 1234
4. Save the file.
The changes take effect the next time the script executed when the host reboots.
Stopping the CIM Extension
To stop the background process for the CIM Extension, enter the following at the command prompt
in the /opt/APPQcime/tools directory:
# ./stop
Keep in mind the following:
• You must have root privileges to stop the CIM Extension.
• When you stop the CIM Extension, the management server is unable to gather information
about this host.
Rolling Over the Logs
The logging information for the CIM Extension is contained primarily in the cxws.log file. The
cxws.log files roll over once the files become more than 30 MB. The information in cxws.log is
moved to cxws.log.1. If cxws.log.1, already exists, cxws.log.2 is created. The numbering for the
files continues sequentially, for example, cxws.log.3, cxws.log.4, etc.
The cxws.out file contains some logging information, such as the CIM Extension starting, which is
recorded in case something unexpected happens with the Java Virtual Machine. The cxws.out file is
rewritten each time the CIM Extension restarts.
How to Determine if the CIM Extension Is Running
You can determine if the CIM Extension is running by entering the following command at the
command prompt:
# ./status
The process for the CIM Extension is displayed.
The CIM Extension is running when a message resembling the following is displayed:
CIM Extension Running
Removing the CIM Extension from SGI IRIX
To remove the CIM Extension for IRIX:
1. Stop the CIM Extension as mentioned in ”Stopping the CIM Extension” on page 173.