HP Storage Essentials V5.00.01 installation guide (T4283-96011, January 2006)

Storage Essentials 5.00.01 Installation Guide 215
desktop. Refer to the documentation for HP Systems Insight Manager. Select a target, and
then, click Run Now.
2. Click the Create button for the Database Information table.
3. In the Host IP/DNS Name field, type the IP address or DNS name of the host running Sybase.
4. You can leave the Management IP/DNS Name field blank. This field is for Oracle clusters.
When you leave the Management IP/DNS Name field blank the management server
automatically lists the DNS name or IP address of the host under the Host IP/DNS Name
column and Management IP/DNS Name column.
5. In the Server Name field, type the Sybase database you want to monitor.
6. In the Port Number field, type the port that Sybase is using.
7. Select SYBASE from the Database Type menu.
8. Click OK.
IMPORTANT: Perform Get Details/Discovery Data Collection for your inputs to take effect. See
”Step 3 - Discovering Applications” on page 216.
Deleting Sybase Information
If you do not want the management server to monitor a Sybase instance, you can remove its
information, as described in the following steps:
1. Do one of the following:
• Discovery from HP SE - Select Tools > Storage Essentials > Home > Discovery >
Setup. Then, click the Applications tab.
• Discovery from HP SIM - Select Options > Protocol Settings > Storage Essentials >
System Application Discovery Settings. To select a target, you must have at least one
element designated as a server, workstation or desktop. If you see the message, “No Targets
Currently Selected,” change your element from unknown to either a server, workstation or
desktop. Refer to the documentation for HP Systems Insight Manager. Select a target, and
then, click Run Now.
2. In the Database Information table, click the button, corresponding to the Sybase instance you
do not want the management server to monitor.
3. Perform Get Details/Discovery Data Collection to make the management server aware of your
changes.
Monitoring Microsoft Exchange
To monitor Microsoft Exchange, you must make the management server aware of domain controller
access. After information for controller access has been added, discover Microsoft
Exchange(Discovery from HP SE only) map the topology and perform Get Details or Discovery Data
Collection. To save time, delay these steps until you have added the configurations for your other
applications and hosts.
To monitor Microsoft Exchange, you must:
• Add information for Microsoft Exchange Domain Controller Access