HP Storage Essentials V5.00.01 installation guide (T4283-96011, January 2006)
Table Of Contents
- HP
- Storage Essentials 5.00.01 Installation Guide
- Contents
- Overview
- Installing the Management Server on Microsoft Windows
- Discovering Filers, Tape Libraries, Switches and Storage Systems
- Deploying CIM Extensions
- Installing the CIM Extension for IBM AIX
- Installing the CIM Extension for SGI ProPack for Linux
- Installing the CIM Extension for HP-UX
- Installing the CIM Extension for SUSE and Red Hat Linux
- Installing the CIM Extension for OpenVMS
- Installing the CIM Extension for HP Tru64 UNIX
- Installing the CIM Extension for SGI IRIX
- Installing the CIM Extension for Sun Solaris
- Installing the CIM Extension for Microsoft Windows
- Discovering Applications, Backup Servers and Hosts
- Managing Security
- Troubleshooting
Installing the Management Server on Microsoft Windows12
Step 3 - Install the Management Server
IMPORTANT: Install HP SIM and the SE Connector before performing a discovery.
Keep in mind the following:
• Refer to the support matrix for operating system requirements on the management server
CD-ROM.
• Refer to the release notes for late breaking information.
• Make sure no other programs are running when you install the management server.
• If you are installing the management server in a production environment, you must install the
management server on a machine with a static IP address.
• The management server uses the following ports. Make sure these ports are available:
• 4444 - JBoss JRMPInvoker
• 4445 - JBoss PooledInvoker
• 8009 - JBoss EmbeddedTomcatService
• 8083 - JBoss WebService
• 8093 - JBoss UILServerILService
• 5986 - RMI port for JwsMain (see JwsMain.java)
•5988 - WBEM HTTP
To install the management server:
1. (Operating systems running double-byte languages only) Remove the sqlnet.ora file, which
can be found in the \oracle\ora92\network\admin directory for a default Oracle
installation.
2. Insert the Windows Manager CD-ROM and double-click InstallManager.exe.
3. When you see the introduction screen, click Next.
4. When you are asked for an installation directory, you can select the default or choose your own.
To choose your own directory, click the Choose button. You can always display the default
directory by clicking the Restore Default Folder button. When you are done, click Next.
5. Read the important notes, such as disabling IIS before running the software. Click Next.
6. Check the pre-installation summary. You are shown the following:
•Product Name
• Installation Folder
• Disk Space Required
• Disk Space Available
NOTE: Refer to the Support Matrix for information about supported hardware.
7. Do one of the following: