HP Storage Essentials V5.00.01 installation guide (T4283-96011, January 2006)
Table Of Contents
- HP
- Storage Essentials 5.00.01 Installation Guide
- Contents
- Overview
- Installing the Management Server on Microsoft Windows
- Discovering Filers, Tape Libraries, Switches and Storage Systems
- Deploying CIM Extensions
- Installing the CIM Extension for IBM AIX
- Installing the CIM Extension for SGI ProPack for Linux
- Installing the CIM Extension for HP-UX
- Installing the CIM Extension for SUSE and Red Hat Linux
- Installing the CIM Extension for OpenVMS
- Installing the CIM Extension for HP Tru64 UNIX
- Installing the CIM Extension for SGI IRIX
- Installing the CIM Extension for Sun Solaris
- Installing the CIM Extension for Microsoft Windows
- Discovering Applications, Backup Servers and Hosts
- Managing Security
- Troubleshooting
Storage Essentials 5.00.01 Installation Guide 23
• OracleOraHome92SNMPPeerMasterAgent
• OracleOraHome92TNSListener
• OracleServiceAPPIQ
NOTE: Before you change the service startup types, make note of the services that are set to
automatic, as you will need to restore the service startup settings when you are done with
installing the patch.
2. Reboot the server.
3. Insert the Database Patch CD into the CD-ROM drive.
4. Open a command prompt window and go to the CD-ROM directory by entering the following:
d:
where d is the drive letter for the CD-ROM drive
5. Enter the following at the command prompt:
d:\>installPatch.cmd
where
d is the drive letter for the CD-ROM drive
If you are asked for the path to the Oracle home, provide the path. The path for the default
Oracle installation is c:\oracle\ora92.
6. To accept the default settings in the File Locations dialog, click Next.
The patch is installed.
Step 5 - Run runDictionaryUpgrade.bat
If you installed the Oracle patch as described in ”Step 4 - Install the Oracle 9.2.0.6.0 Patch if
Necessary” on page 22, you must run the runDictionaryUpgrade.bat script to migrate the
database:
1. Start the following services:
• OracleOraHome92TNSListener
• OracleServiceAPPIQ
2. Run the runDictionaryUpgrade.bat script. The runDictionaryUpgrade.bat script
can be found on the top level of the Database Patch CD-ROM.
3. When you are asked to enter the SYS password, provide the password.
4. You receive an error if a database does not exist. Ignore the error.
5. Restore the Oracle services, AppStorManager and the Distributed Transaction Coordinator
service to automatic so they automatically start the next time the server is rebooted.
6. Reboot the server.
Step 6 - Upgrade the Management Server
This step is required for all users. To upgrade the management server: