HP Storage Essentials V5.00.01 installation guide (T4283-96011, January 2006)

Storage Essentials 5.00.01 Installation Guide 39
• The following steps provide general information on how to discover an element. See Table 5 on
page 45, Table 8 on page 68, and Table 2 on page 196.
• To obtain drive-related statistics, install a proxy host. Ensure the proxy host has at least one LUN
rendered by each controller of the array. See ”Obtaining Disk Drive Statistics from Engenio
Storage Systems” on page 223 for more information.
• (Discovery from HP SE only) The Do Not Authenticate option is for Engenio storage systems.
The Engenio storage systems do not require a password for Get Details. If you want do not want
to use the management server for provisioning on Engenio storage systems, you can leave the
password field blank and select the Do Not Authenticate option. The management server will
still monitor the Engenio storage system; however, you will not be able to do provisioning tasks.
Discovery from HP SIM
To discover a single IP address or DNS name:
1. Select Options > Discovery. Then, click the Manual tab.
2. Select one of the following:
• System Name - Select this option if you want to discover an element by its DNS name.
• IP Address - Select this option if you want to discover an element by its IP address.
3. (Optional) Click More Settings if you want to provide more information for your discovery.
NOTE: Refer to the HP SIM documentation about the additional settings that appear when
you click the More Settings button.
4. Click Add System.
HP SIM starts the discovery process.
Discovery from HP SE
To add a single IP address or DNS name to discover:
1. Click Tools > Storage Essentials > Home on the HP SIM home page menu. The Storage
Essentials home page opens in a separate web browser window. From the Storage Essentials
home page, click Discovery, then click Setup in the upper right pane of the Storage
Essentials window.
2. Under Discovery Setup, select Step 1 at the top of the screen.
3. On the IP Addresses tab, click the Add Address button.
4. In the IP Address/DNS Name field, type the IP address or DNS name of the device you want to
discover.
5. In the User Name (Optional) field, type the user name. If you are discovering an Engenio
storage system, leave this field blank.
This field can also be left blank if the element's user name and password are one of the default
user names and passwords.
6. Do one of the following for the password:
• If you do not want to do provisioning on a storage system, leave the Password field blank.
For Engenio storage systems, you must also select the Do Not Authenticate option.