HP Storage Essentials V5.00.01 installation guide (T4283-96011, January 2006)
Table Of Contents
- HP
- Storage Essentials 5.00.01 Installation Guide
- Contents
- Overview
- Installing the Management Server on Microsoft Windows
- Discovering Filers, Tape Libraries, Switches and Storage Systems
- Deploying CIM Extensions
- Installing the CIM Extension for IBM AIX
- Installing the CIM Extension for SGI ProPack for Linux
- Installing the CIM Extension for HP-UX
- Installing the CIM Extension for SUSE and Red Hat Linux
- Installing the CIM Extension for OpenVMS
- Installing the CIM Extension for HP Tru64 UNIX
- Installing the CIM Extension for SGI IRIX
- Installing the CIM Extension for Sun Solaris
- Installing the CIM Extension for Microsoft Windows
- Discovering Applications, Backup Servers and Hosts
- Managing Security
- Troubleshooting
Storage Essentials 5.00.01 Installation Guide 67
IMPORTANT: Look at Event Manager for additional information. See ”About Event Manager” on
page 532 for more information.
Duplicate Logs for Brocade Switches in Same Fabric
If you discover more than one Brocade switch in the same fabric, the discovery log displays
duplicate listings for the Brocade switches. Each Brocade switch is listed multiple times with the IP
address of the other switches and its own.
For example, assume you are discovering Brocade switches QBrocade2 and QBrocade5 in the
same fabric, two duplicate entries are displayed in the log. QBrocade2 is listed twice, once with its
own IP address, the other time with the IP address of QBrocade5, as shown below.
[Nov 27, 2002 8:45:05 AM] Discovered Switch: QBrocade2 at 192.168.10.22
[Nov 27, 2002 8:45:09 AM] Discovered Switch: QBrocade5 at 192.168.10.22
[Nov 27, 2002 8:45:09 AM] Enabling provider configuration:
APPIQ_BrocadeElementManagerConfig
[...]
[Nov 27, 2002 8:45:37 AM] Discovered Switch: QBrocade2 at 192.168.10.25
[Nov 27, 2002 8:45:42 AM] Discovered Switch: QBrocade5 at 192.168.10.25
[Nov 27, 2002 8:45:42 AM] Enabling provider configuration:
APPIQ_BrocadeElementManagerConfig
NOTE: (Discovery from HP SE only) On the Topology page, the software displays each Brocade
switch (192.168.10.22 and 192.168.10.25) as elements:
192.168.10.22 Switch QBrocade2, QBrocade5 admin
192.168.10.25 Switch QBrocade2, QBrocade5 admin
Step 2 - Discover Storage Systems, Filers and Tape Libraries
• ”Discovering 3PAR Storage Systems” on page 70
• ”Discovering EMC Solutions Enabler 5.1” on page 71
• ”Excluding EMC Symmetrix Storage Systems from Discovery” on page 72
• ”Discovering EMC CLARiiON Storage Systems” on page 73
• ”Discovering Engenio Storage Systems” on page 73
• ”Discovering HDS Storage Systems” on page 75
• ”Excluding HDS Storage Systems from Discovery” on page 77
• ”Discovering HP StorageWorks Arrays” on page 78
• ”Discovering IBM Storage Systems” on page 79
• ”Discovering Sun StorEdge 3510 Storage Systems” on page 81
• ”Discovering Sun StorEdge 6920 Storage Systems” on page 83
• ”Discovering Sun StorEdge 6130 Storage Systems” on page 83
• ”Discovering Xiotech Storage Systems” on page 84