HP Storage Essentials V5.00.01 installation guide (T4283-96011, January 2006)
Table Of Contents
- HP
- Storage Essentials 5.00.01 Installation Guide
- Contents
- Overview
- Installing the Management Server on Microsoft Windows
- Discovering Filers, Tape Libraries, Switches and Storage Systems
- Deploying CIM Extensions
- Installing the CIM Extension for IBM AIX
- Installing the CIM Extension for SGI ProPack for Linux
- Installing the CIM Extension for HP-UX
- Installing the CIM Extension for SUSE and Red Hat Linux
- Installing the CIM Extension for OpenVMS
- Installing the CIM Extension for HP Tru64 UNIX
- Installing the CIM Extension for SGI IRIX
- Installing the CIM Extension for Sun Solaris
- Installing the CIM Extension for Microsoft Windows
- Discovering Applications, Backup Servers and Hosts
- Managing Security
- Troubleshooting
Discovering Filers, Tape Libraries, Switches and Storage Systems70
Discovering 3PAR Storage Systems
NOTE: You do not need to provide the interop namespace because the management server
includes the interop namespace for 3PAR storage systems in its default list.
Discovery from HP SIM
To discover a 3PAR storage system, provide the following information in HP Systems Insight
Manager:
• Provide the IP address or system name for the storage system. See ”Adding an IP Range for
Scanning” on page 37 or ”Adding a Single IP Address or DNS Name for Discovery” on
page 38 for more information.
• User name of the storage system.
• Password of the storage system.
Discovery from HP SE
To discover a 3PAR storage system:
1. Click Tools > Storage Essentials > Home. See ”Accessing the Discovery Pages for HP SIM
and HP SE” on page 31 if needed. Discovery > Setup.
2. Select Step 1 at the top of the page.
3. Click the IP Addresses tab.
4. Click the Add Address button.
5. In the IP Address/DNS Name field, the following for the 3PAR storage system you want to
discover.
<host>
where <host> is the IP address or DNS name of the 3PAR storage system you want to discover.
6. Enter the User Name of the storage system.
7. Enter the Password of the storage system.
8. Retype the password in the Verify Password field.
9. In the Comment field (optional), type a comment for additional information. The information
typed into this field is displayed under the Comment column in the Addresses to Discover list
(Tools > Storage Essentials > Home > Discovery > Setup).
10.Do not select the Do Not Authenticate option.
11.Click OK.
12.To start discovering elements on the network, click the Start Discovery button on the IP
Addresses tab.
Discovering EMC Solutions Enabler 5.1
EMC Solutions Enabler restricts access to itself through the nethost file. If present, the nethost file is
located in the same directory as the netcnfg file. If you are using a nethost file, edit it to allow the