HP Storage Essentials SRM 6.0 User Guide for Enterprise Edition and Standard Edition SRM Software (July 2008)

Discovering Applications, Backup Hosts and Hosts112
5. In the Server Name box, enter the Sybase database you want to monitor.
6. In the Port Number box, enter the port that Sybase is using.
7. Select SYBASE from the Database Type menu.
8. Click OK.
IMPORTANT: Perform Discovery Data Collection for your inputs to take effect. See ”Step 3 —
Discovering Applications” on page 123.
Deleting Sybase Information
If you do not want the management server to monitor a Sybase instance, you can remove its
information, as described in the following steps:
1. Select Options > Protocol Settings > Storage Essentials > System Application Discovery Settings.
To select a target, you must have at least one element designated as a server, workstation or
desktop. If you see the message, “No Targets Currently Selected,” change your element from
unknown to either a server, workstation or desktop. See the documentation for HP Systems
Insight Manager. Select a target, and then, click Run Now.
2. In the Database Information table, click the button, corresponding to the Sybase instance you
do not want the management server to monitor.
3. Perform Discovery Data Collection to make the management server aware of your changes.
Monitoring Microsoft Exchange
NOTE: If you are planning to monitor Microsoft Exchange Clusters, see ”Monitoring Microsoft
Exchange Failover Clusters” on page 113.
To monitor Microsoft Exchange, you must make the management server aware of domain controller
access. After information for controller access has been added, discover Microsoft Exchange and
perform Discovery Data Collection. To save time, delay these steps until you have added the
configurations for your other applications and hosts.
To monitor Microsoft Exchange, you must:
• Add information for Microsoft Exchange Domain Controller Access
• Discover the application (”Step 3 — Discovering Applications” on page 123).
Adding Microsoft Exchange Domain Controller Access
Before adding a domain controller, note the following:
• The hosts should recognize the management server by name, because a reverse look-up is
required by both operating system security and Microsoft Exchange. Make sure the domain
controller, Exchange server host, and management server are accessible to one other using the
host name and the fully-qualified domain name.