HP Storage Essentials SRM 6.0 User Guide for Enterprise Edition and Standard Edition SRM Software (July 2008)

HP Storage Essentials SRM 6.0 User Guide 113
• The user name you provide could be either the Windows logon name or Common Name (CN)
of the Active Directory User for accessing the Microsoft Exchange server. If the CN is provided,
make sure that the user resides under the default Users Organization Unit (OU). If the Windows
logon name is provided, it should be in the format: Domain\Username and the corresponding
user could be in any OU.
To find the CN for a user on a domain controller server:
a. Install the ADSIEdit MMC snap-in if it is not installed.
b. Select Start > Run and enter adsiedit.msc.
c. When the snap-in opens, expand the DOMAIN directory and navigate to the CN=Users
folder to see the CN for each user in the Active Directory.
To provide information about your domain controllers:
1. Select Options > Protocol Settings > Storage Essentials > Global Application Discovery Settings.
2. In the Exchange Information section, click Create.
3. Click the Add New Domain Controller link.
a. In the Domain box, enter the domain name.
b. In the Domain Controller Name box, enter the fully qualified DNS name for the domain
controller.
c. In the User Common Name box, enter the user name of the Active Directory User for
accessing the Microsoft Exchange server.
d. In the Domain Password box, enter the corresponding password for accessing the Microsoft
Exchange server.
e. In the Verify Password box, re-enter the password for verification.
4. Click Add.
The domain controller is added to the table.
5. Click OK.
6. Repeat these steps for each domain controller.
7. When all of your domain controllers are added, run wmiadap /f on the Exchange Server to
refresh the Exchange data.
IMPORTANT: You must discover the host running Microsoft Exchange. See ”Step 3 — Discovering
Applications” on page 123.
Editing a Microsoft Exchange Domain Controller
To provide information about your domain controllers:
1. Select Options > Protocol Settings > Storage Essentials > Global Application Discovery Settings.
2. Click the Edit button next to the Exchange domain controller you want to edit.
3. Enter a new User Name or Domain Password.
4. Click Edit.
The domain controller updates are added to the table.