HP Storage Essentials SRM 6.0 User Guide for Enterprise Edition and Standard Edition SRM Software (July 2008)

HP Storage Essentials SRM 6.0 User Guide 131
3. Cluster Manager Step 2 (Specify Cluster Properties and Cluster Members) is displayed. If you
are discovering an HP Serviceguard cluster, this page may already be populated, and you can
skip to the next step. If this page isn’t already populated, follow these steps to specify the cluster
properties and cluster members:
a. In the Cluster Properties section, specify the cluster name, cluster server, and cluster virtual IP.
b. In the Available Hosts section, select the hosts to add to the Cluster Members table. If
desired, use the filter to assist in the selection of hosts. For details about the filtering
functionality, see ”Filtering Hosts” on page 132.
You may also use the Select Related Hosts button to facilitate the selection of hosts. Select a
host in the table, and click Select Related Hosts to automatically select any related hosts.
c. After you have selected the hosts that you would like to add to the cluster, click Add Selected
Hosts to Cluster. The selected hosts are added to the Cluster Members table.
d. Click Next.
4. Cluster Manager Step 3 (Specify Cluster Shared Resources) is displayed. Select Automatic or
Manual. If you select Automatic, click Display Cluster Shared Resources, and the table at the
bottom of the page is automatically populated.
If you select Manual discovery, follow these steps:
a. Enter a name in the Cluster Shared Resource Name box.
b. Select a resource type from the Resource Type menu. The menu includes the following
resource types:
• Logical Disk
• Disk Partition
• Volume Manager Volume
• Disk Drive
c. Select the relevant resource for each cluster host, and click Save Selections as Cluster Shared
Resource. The selections are added to the Cluster Shared Resources table.
d. Repeat steps a through c for each shared resource in the cluster.
e. Click Next.
5. Cluster Manager Step 4 (Select Preferred Hosts for Cluster Shared Resources) is displayed.
Select a preferred host for each of the cluster shared resources. Shared resource capacity data
will be collected from the specified node. Selecting “None” will result in no information being
collected about the cluster shared resource.
Specify the preferred host for individual cluster shared resources. If a resource is not shared by
the preferred host selection, the preferred host menu for that shared resource will continue to
display the previous selection.
When you have finished specifying preferred hosts, click Finish.