HP Storage Essentials SRM 6.0 User Guide for Enterprise Edition and Standard Edition SRM Software (July 2008)

Configuring the Management Server198
• Next Scheduled Run - Displays the next time the management server is scheduled to obtain
image details from the backup server.
• Interval in Minutes - Displays how often the management server is scheduled to obtain image
details.
• Running - A check mark means the collector is running.
• Edit Schedule - Lets you modify the collection details
• Start Collectors - Click this button to start the collectors.
• Stop Collectors - Click this button to stop the collectors.
Scheduling Backup Collection for Backup Managers
You can configure the management server to obtain information about your master backup servers
at a set interval. You can obtain image details, session details, or media details.
Keep in mind the following:
• Make sure these collectors run at least daily, so the latest backup information is displayed in
Backup Manager.
• All collectors are stopped during Discovery Data Collection. This means that during Discovery
Data Collection, data such as for Backup Manager is not updated.
• The process of Discovery Data Collection takes time. It is recommended you perform this
procedure when the network is not busy.
• It is not possible to run data collectors on quarantined elements. Attempting to do so will result in
exceptions in the appstorm.<timestamp>.log file.
To obtain details for a backup server:
1. Select Tools > Storage Essentials > Home > Configuration > Backup.
2. Select one of the collection tabs.
3. Select the management servers for which you want to obtain details.
4. Click the Start Collectors button.
5. Set the date, time, and repeat interval for this task. For more information, see ”Setting the Date
and Time for Scheduled Tasks” on page 181.
6. Click OK.
The management server gathers information about image, session, or media details.
Editing the Schedule of Backup Collection
To change when the management server obtains details for a backup server:
1. Select Tools > Storage Essentials > Home > Configuration > Backup.
2. Select one of the collection tabs.
3. Click the Edit ( ) button corresponding to the Backup Manager you want to modify for its
collection of details.
4. Click the Start Collectors button.