HP Storage Essentials SRM 6.0 User Guide for Enterprise Edition and Standard Edition SRM Software (July 2008)

HP Storage Essentials SRM 6.0 User Guide 269
* Additional menu items may appear for types of automators and advisors, such as Reachable
Storage. The descriptions of the right-click menu options for a fabric appear in the following section,
since these menu options are only accessible from the List tab.
When you right-click a fabric in the List tab, you are shown the following options:
• Change Fabric Name - Enter the new fabric name in the Change Fabric Name window, and
then click OK.
• Go to Properties - Displays the properties of the fabric. See ”Viewing Element Properties” on
page 307 for more information. It also provides access to the Events and Provisioning Manager
tabs. The Events tab displays events occurring within the fabric. The Provisioning Manager tab
lets you set up and manage zone provisioning. Provisioning Manager may not be available in
Delete Element Removes an element and its discovery instance from the system. It also
removes other elements discovered through the removed element.
Important: If you are blocking pop-ups in a Netscape or Mozilla Web
browser, and you use the right-click menu to delete an element from System
Manager, the Delete window is blocked, and you are unable to delete the
element. You must disable the pop-up blocker before you can delete the
element.
Adding a Custom
Command
Lets you run a custom command on an element, for example to start an
executable or a script. See ”Adding a Custom Command” on page 293.
Group together
with other
elements
Lets you group “Discovered” hosts and storage systems.
See one of the following topics:
• ”Grouping Discovered Hosts” on page 286
• ”Grouping Discovered Storage Systems” on page 288
Ungroup into
multiple elements
Lets you ungroup “Discovered” hosts and storage systems.
See one of the following topics:
• ”Ungrouping Discovered Hosts” on page 287
• ”Ungrouping Discovered Storage Systems” on page 289
Recalculate
Topology
Lets you know about topology changes. The management server contacts the
elements on the topology list (Discovery > Topology) to determine topology
changes. The management server uses this updated information to redraw the
topology.
Change Fabric
Name
(Only Available
from the List Tab)
Lets you change the name of the fabric. See ”Changing the Fabric Name” on
page 289 for more information.
Table 31 Menu Options Accessible from the Topology* (continued)
Menu Option Description