HP Storage Essentials SRM 6.0 User Guide for Enterprise Edition and Standard Edition SRM Software (July 2008)

HP Storage Essentials SRM 6.0 User Guide 301
6. In the Command Line box, enter the following command, which will run on the management
server:
cmd /k
7. Select the All elements option.
8. Click OK.
To run the remote command prompt:
1. Right-click an element from which you want to obtain information.
2. Select Custom Commands and select the command from the menu.
The software displays the remote console on the management server.
To enter a command in the remote console:
1. Enter the command in the Commands box, and then
2. Press Enter.
You can stop a command by clicking the Stop button in the remote console.
Keep in mind the following:
• You can quickly access information about the element you right-clicked by typing the following at
the command prompt:
set appiq
• The software ships with a utility called plink. To view the commands for plink, enter the following
in the Commands box and then press ENTER:
plink
Buttons on the Remote Console
The remote console provides the Stop and Help buttons, as described in Table 40 on page 300.
Table 40 Buttons on the Remote Console
Button Description
Stop Stops a command. Once a command has been executed the console
becomes inactive.
Help Provides the following information about the remote console:
• Clearing the remote console - Enter CLS in the Commands box of the
remote console.
• Copying text to the Commands box - Place the cursor at the end of the
line in the window below the Commands box, and then press ENTER.
The command is copied to the Commands box.
Note: If you are viewing the remote console on Microsoft Windows, you
can copy text by using CTRL + C, then use CTRL + P to paste it.