HP Storage Essentials SRM 6.0 User Guide for Enterprise Edition and Standard Edition SRM Software (July 2008)

Viewing Element Topology and Properties316
Figure 60 Multipathing Displayed in the Topology (Continued)
Keep in mind the following:
• If you do not see all of the elements in the path displayed, verify they have been discovered and
details have been obtained from them. See ”Discovering Switches, Storage Systems, NAS
Devices, and Tape Libraries” on page 19.
• For multipathing issues regarding certain devices, see ”Known Device Issues” on page 722.
• The management server displays only the active path for an RDAC host. It also displays only the
active path when PowerPath is running on a host connected to a CLARiiON storage system. The
management server also does not support RDAC configurations for monitoring disk statistics.
Direct Attached Storage
To view direct attach storage, you must enable the button. See Table 29 on page 253 for more
information.