HP Storage Essentials SRM 6.0 User Guide for Enterprise Edition and Standard Edition SRM Software (July 2008)

HP Storage Essentials SRM 6.0 User Guide 535
1. Select Options > Storage Essentials > Manage Product Health, and then click Advanced in the
Disk Space tree.
2. Click Show Default Properties at the bottom of the page.
3. Copy the following command. How you copy the text depends on your Web browser. If you are
using Microsoft Explorer or Netscape Navigator, select the text and then right-click the selected
text. Then select Copy.
cimom.cisco.displayZoneDatabase=primary
4. Return to the Advanced page (Options > Storage Essentials > Manage Product Health, and then
click Advanced in the Disk Space tree).
5. Paste the copied text into the Custom Properties box. How you paste the text depends on your
Web browser. If you are using Microsoft Explorer or Netscape Navigator, right-click the box and
select Paste.
6. In the Custom Properties box, change the value of cimom.cisco.displayZoneDatabase.
For example, to set the value of cimom.cisco.displayZoneDatabase to all, you would
change the value from primary to all as shown in the following example:
cimom.cisco.displayZoneDatabase=all
7. When you are done, click Save.
About the Messages Displayed in the Brocade Console
You can ignore the following messages in the Brocade Console. It is just the management server
talking to the Brocade switch and subscribing to the event service.
wwn: 10:0:0:60:69:12:1a:5, cnt: 1, ipclnts: 0
total number of api event proxy servers: 0
total number of api event proxy servers: 0
total number of api event proxy servers: 1
proxy server 0 Did: 16776194
wwn: 10:0:0:60:69:10:56:fb, cnt: 1, ipclnts: 0
total number of api event proxy servers: 1
proxy server 0 Did: 16776194
wwn: 10:0:0:60:69:10:56:fb, cnt: 1, ipclnts: 0
wwn: 10:0:0:60:69:12:1a:5, cnt: 1, ipclnts: 0
To view the status of the switch, access the Brocade Console by typing the user name and password
for the switch in a Telnet window, and then enter switchshow at the prompt