HP Storage Essentials SRM 6.0 User Guide for Enterprise Edition and Standard Edition SRM Software (July 2008)

HP Storage Essentials SRM 6.0 User Guide 725
Solaris host VxVM If you discover a host with any typical SAN disk groups off
line, the storage volume page shows SAN mount points as
local instead of external. These disks, however, are not
accessible.
When you perform Discovery Data Collection with all disk
groups online, disks on the SAN are shown as external. Hosts
connected directly to a storage system are shown as local,
except for hosts connected by fibre. Hosts connected directly to
a storage system through fiber are shown as external.
Windows host VxVM When a Windows host with VxVM is used, the SCSI bus
number is always reported to be 1 in the SCSI bus column of
the Disk Drives page.
Any host NA The Unmounted Volume box under Capacity Summary
automatically displays 0 MB if you discovered the host but not
the storage system connected to it. This may occur if you did
not enter the IP address of the storage system when performing
discovery, or if your license does not allow you to discover a
particular storage system. See the support matrix for Standard
or Enterprise Edition to determine which storage systems you
can discover. The List of Features is accessible from the
Documentation Center (Help > Documentation Center in
Storage Essentials).
Table 162 Known Device Issues (continued)
Device Software Description