HP Storage Essentials Storage Resource Management Report Optimizer Software 6.0 Performing On-Report Analysis with Web Intelligence (August 2008)

Analyzing results48
The Start Drill Mode button is pressed in when you are in Drill mode.
2. Right-click the drillable dimension, then click Drill By... on the Drill menu.
A series of sub menus list the dimensions to which you can drill.
3. Select the dimension you want to analyze.
The drilled results appear on the table.
To drill on a measure value on a table
1. Verify you are working in Drill mode.
The Start Drill Mode button is pressed in when you are in Drill mode.
2. Right click or rest your pointer on the measure value on which you want to drill.
A contextual menu or ToolTip indicates the next dimension(s) in each related drill path.
3. Click the hyperlinked measure or click the option in the Drill menu.
The report now displays data one dimension level down.
A filter for each related dimension value appears as a list box in the Drill toolbar. These
filters represent the dimension values that you replaced by your drill action. In the
example above, filters for Year, Lines, and State appear in the Drill toolbar.
NOTE: If the drilled report includes dimensions from multiple queries, a ToolTip
appears when you rest your cursor on the value displayed on the filter. The ToolTip
displays the name of the query and the dimension for the value.
Drilling on sections
To perform drill analysis on results in sections of reports, you drill on the value displayed in
the section cell. When you drill on section cell, the results on all of the tables or charts in
the drilled section are modified by your drill action. For example, if you drill on a section