HP Storage Essentials V5.1 Installation Guide Second Edition (Linux Release) (T4283-96055, November 2006)

Discovering NAS Devices, Tape Libraries, Switches and Storage Systems122
Discovery from HP SE
To discover Sun StorEdge 6920 and 6940 storage systems:
1. Click Tools > Storage Essentials > Home on the HP SIM home page menu. The HP SE home
page opens in a separate web browser window. Click Discovery > Setup in the upper-right
pane of the HP SE home page window.
2. Select Step 1 at the top of the page.
3. Click the IP Addresses tab.
4. Click the Add Address button.
5. In the IP Address/DNS Name field, type the IP address or DNS name of the storage system you
want to discover.
6. Enter the User Name of the storage system.
7. Enter the Password used to access the storage system.
8. Retype the password in the Verify Password field.
9. In the Comment field (optional), type a comment for additional information. The information
typed into this field is displayed under the Comment column in the Addresses to Discover list
(Tools > Storage Essentials > Home > Discovery > Setup).
10.Do not select the Do Not Authenticate option.
11.Click OK.
12.To start discovering elements on the network, click the Start Discovery button on the IP
Addresses tab.
“ReplicatorSQLException: Database create error” During Get Details
While performing a Get Details, the Sun 6920 provider will return the error
“ReplicatorSQLException: Database create error” under certain circumstances. This error appears in
the management server logs but can be safely ignored. Sun Microsystems is aware of this issue.
Mirrored Volumes Cannot Be Provisioned
on Sun 6920 Storage Systems
Mirrored volumes are not represented properly by the management server. You cannot use the
management server to provision mirrored volumes on Sun 6920 storage system.
Discovering Sun StorEdge 6130 Storage Systems
Discovery from HP SIM
To discover Sun StorEdge 6130 storage systems, provide the following information in HP Insight
Manager:
• IP address or system name of the controller or proxy you want to discover. See ”Adding an IP
Range for Scanning” on page 65 or ”Adding a Single IP Address or DNS Name for Discovery”
on page 66 for more information.
• HP SIM does not allow blank user names. Enter anything for the user name.
• Password for the controller or proxy.
Refer to the HP SIM documentation for more information on working with HP SIM.