HP Storage Essentials Storage Resource Management Report Optimizer Software 6.0 Building Reports Using the Web Intelligence Java Report Panel (August 2008)

Building Reports Using the Web Intelligence Java Report Panel 383
The drilled chart displays sales revenue per city per category for the “City Trousers”
clothing line.
The
Drill toolbar displays the values that filter the dimensions displayed on the chart. By
looking at the filters in this example, you can quickly see that the chart only displays sales
revenue information for City Trousers sold in California during Q1 in 2001.
Drilling on a measure in a chart
To drill on a measure in a chart:
1. Verify you are in Drill mode.
The Drill button is pressed in when you are working in Drill mode.
2. Place your pointer on the measure value on which you want to drill.
On charts, each measure is represented by a bar (on bar charts) or by a data marker
(on a line charts and radar line charts).
3. The next step depends on whether you want to drill down or drill up on the measure
value:
The chart displays the value(s) for the dimension to which you drilled.
Limitations when drilling on measures on certain chart types
When you drill on charts that are not bar charts, Web Intelligence may perform the drill
action only on certain dimensions instead of performing the drill action on all of the
dimensions on the chart axes. When you drill on measures in the following chart types,
Web Intelligence only performs the drill action on the values in the axis legend:
• area charts – 2D, 3D, and stacked
If you want to... then...
drill down on the measure
value,
click the bar or data marker.
drill up on the measure value, right-click the bar or data marker,
and then click Drill up.
Drill