HP Storage Essentials Storage Resource Management Report Optimizer Software 6.0 Building Reports Using the Web Intelligence Java Report Panel (August 2008)

Setting up documents for drill analysis386
Showing or hiding the Drill toolbar
To show or hide the
Drill toolbar:
1. Verify you are in Drill mode.
The Drill button is pressed in when you are working in Drill mode.
The
Show/Hide Drill Toolbar button is activated on the report panel toolbar.
2. The next step depends whether the
Drill toolbar is displayed or not at the top of the
report:
NOTE: You can set your drill options in InfoView, so that when you open a
document to start Drill mode, the
Drill toolbar is always hidden by default. For more
information, see ”Showing or hiding the Drill toolbar” on page 358.
Changing filter values during drill analysis
Filters appear as list boxes in the Drill toolbar. Each list box contains the values associated
with that filter. You select the data displayed in a table or chart by choosing the
appropriate values from the list boxes. For example, if you drill on results for Q3 to see
more detailed data for month, the monthly results are filtered for Q3. To see monthly results
for another quarter, you simply change the filter value in the list box by selecting the
quarter you want.
Changing a filter value on the Drill toolbar
To change a filter value on the
Drill toolbar:
1. Verify you are in Drill mode.
If... then...
the Show/Hide Drill Toolbar
button is pressed in,
click the button to hide the
Drill
toolbar
.
the Show/Hide Drill Toolbar
button is not pressed in,
click the button to show the
Drill
toolbar
.