HP Storage Essentials SRM 6.0 User Guide for Enterprise Edition and Standard Edition SRM Software (July 2008)

HP Storage Essentials SRM 6.0 User Guide 281
• Right-click an element, and then select Show Element Topology from the menu.
2. Right-click an element in the topology.
3. From the menu, select Show Port Details.
The ports are displayed.
Showing the Impact of an Element
You can display an element's impact. For example, assume you want to replace a switch. You can
use this feature to determine which elements in the network would be impacted by taking the switch
off the network.
To find an element's impact:
1. Right-click the element from which you want to obtain impact information.
2. Select Show Impact (or Show Cluster Impact if you right-clicked a cluster) from the menu.
The other elements in the path of the element you right-clicked are highlighted in yellow. For
example, assume you right-clicked the Oracle instance klu2e (shown in the following figure) and
selected Show Impact from the menu. The elements on which klu2e is dependent are highlighted