HP Storage Essentials V5.1 User Guide Second Edition (Linux Release) (T4283-96056, November 2006)

Storage Essentials 5.1 User Guide 571
Sudden Dips Displayed in Certain Charts
in Performance Manager
In Performance Manager and on the Monitoring tab, charts that display data gathered by certain
volume and drive counters display their charts with the results increasing to the maximum value and
then decreasing rapidly to a very low number that starts rising again.
The sudden dip in the charts occur because the counters holding the values displayed in the charts
can contain at most 231 (2147483648) integers. The counters revert back to zero after reaching
231 (2147483648) integers. Then, they continue to go up again. The counters do not usually
display zero in a chart because they are quickly gathering data again.
The following charts for individual drives are impacted: ReadIOs, WriteIOs, TotalIOs, Bytes
Transferred, Unrecovered Errors, Recovered Errors, Timeouts, Retried Requests
The following charts for individual volumes are impacted: Bytes Read, Bytes Read Large, Bytes
Written, Bytes Written Large, ReadIOs Large, WriteIOs Large, ReadIOs, WriteIOs, TotalIOs, Bytes
Transferred, ReadHitIOs
Values Continue to Increase in Charts
for Aggregated Drives and Aggregate
Volumes
Values in charts for aggregate drives and aggregate volumes continue to rise smoothly in
Performance Manager and on the Monitoring tab. The only time the values in the charts come back
down to the values returned by the array, is when the service for the management server restarts.
Then, the charts display the values returned by the array. The values in the charts continue to rise
until the service for the management server is stopped.
The values in the charts continue to rise because the values do not revert back to zero when an
individual drive or volume counter that makes up the aggregation contain 231 (2147483648)
integers. Instead, the values continue to rise smoothly.
The following charts for aggregate drives are impacted and charts for aggregated drives are also
provided for arrays, controllers, and volume groups: ReadIOs, WriteIOs, TotalIOs, Bytes Transferred,
Unrecovered Errors, Recovered Errors, Timeouts, Retried Requests
The following charts for aggregate volumes are impacted, and charts for aggregated volumes are
also provided for arrays, controllers, and volume groups: Bytes Read, Bytes Read Large, Bytes
Written, Bytes Written Large, ReadIOs Large, WriteIOs Large, ReadIOs, WriteIOs, TotalIOs, Bytes
Transferred, ReadHitIOs
HP-UX 11.0 with HDLM Y
HP-UX 11.i with HDLM Y
Table 133 Host Monitoring Support (continued)
Host Configuration Monitoring Supported?