HP Storage Essentials V5.1 User Guide Second Edition (Linux Release) (T4283-96056, November 2006)

Troubleshooting680
• ”No Stitching for Brocade Switches with Firmware 3.2.0” on page 683
• ”Link Between a Brocade Switch and a Host Disappears from the Topology” on page 684
• ”Incorrect Topology Sometimes Displayed for CNT Switches” on page 684
• ”Unable to Find Elements on the Network” on page 684
• ”Unable to See Path Information” on page 684
• ”Device Locking Mechanism for Brocade Element Manager Query/Reconfiguration” on
page 684
• ”A Discovered Sun StorEdge A5000 JBOD Does Not Display Its WWN Properly” on page 685
• ”Unable to Monitor McDATA Switches” on page 685
• ”Unable to Detect a Host Bus Adapter” on page 685
• ”Navigation Tab Displays Removed Drives as Disk Drives” on page 685
• ”Unable to Obtain Information from a CLARiiON Storage System” on page 685
• ”Discovery Fails Too Slowly for a Nonexistent IP Address” on page 686
• ”“CIM_ERR_FAILED” Message” on page 687
• ”Communicating with HiCommand Device Manager Over SSL” on page 688
• ”Unable to Discover a UNIX Host Because of DNS or Routing Issues” on page 689
About the Topology
The software determines the topology by looking at the following:
• Fibre channel switch The fibre channel switch contains a list of all elements within the fabric.
The software obtains a detailed listing of all elements connected to the switch fabric.
• A host containing a Host Bus Adapter (HBA) All fibre channel host adapters look for
available elements attached to the HBA. This information is gathered by CIM Extensions and
sent to the management server.