HP Storage Essentials V5.1 Installation Guide Second Edition (Linux Release) (T4283-96055, November 2006)

Storage Essentials 5.1 Installation Guide 127
cause all NetApp NAS devices to communicate using SSL. See ”Enabling SSL Communication
with a NetApp NAS Device” on page 128 for more information.
• If you want the management server to be able to receive events from a NetApp NAS device, you
must add the IP address of the management server to the NetApp configuration. The
management server runs on the same computer running the management server by default.
• You must provide a privileged login, which is one of the following:
•the root user
• a user belonging to the “Administrators” group. This is a predefined group by NetApp.
• a user belonging to a group that has the following roles: api-*, cli-*, login-http-admin, and at
least one of the following: login-console, login-telnet, login-rsh, or login-ssh
• Administrative HTTP access to the device can be restricted through the httpd.access and
httpd.admin.access options. If that is the case, then the management server needs to be
registered with the device. This is done by adding the IP addresses of the management server to
the httpd.admin.access option. More information related to this option is available in the
NetApp documentation.
Discovery from HP SIM
To discover a NetApp NAS device, provide the following information in HP Insight Manager:
• IP address or system name of the NetApp NAS device you want to discover. See ”Adding an IP
Range for Scanning” on page 65 or ”Adding a Single IP Address or DNS Name for Discovery”
on page 66 for more information.
• User name of the NetApp NAS device. You must provide a privileged login.
• Password used to access the NetApp NAS device.
Discovery from HP SE
To discover a NetApp NAS device:
1. Click Tools > Storage Essentials > Home > Discovery > Setup.
2. Select Step 1 at the top of the page.
3. Click the IP Addresses tab.
4. Click the Add Address button.
5. In the IP Address/DNS Name field, type the IP address or DNS name of the NetApp NAS
device you want to discover.
6. Enter the User Name of the NetApp NAS device. You must provide a privileged login.
7. Enter the Password used to access the NetApp NAS device.
8. Retype the password in the Verify Password field.
9. In the Comment field (optional), type a comment for additional information. The information
typed into this field is displayed under the Comment column in the Addresses to Discover list
(Tools > Storage Essentials > Home > Discovery > Setup).
10.Do not select the Do Not Authenticate option.
11.Click OK.