HP Storage Essentials V5.1 Installation Guide Second Edition (Linux Release) (T4283-96055, November 2006)
Storage Essentials 5.1 Installation Guide 183
9 Installing the CIM Extension for SUSE and Red Hat
Linux
This chapter describes the following:
• ”About the CIM Extension for Red Hat Linux Advanced Server and SUSE Linux” on page 183
• ”Prerequisites” on page 183
• ”Verifying SNIA HBA API Support” on page 184
• ”Installing the CIM Extension” on page 185
• ”Starting the CIM Extension Manually” on page 186
• ”How to Determine if the CIM Extension Is Running” on page 186
• ”Configuring CIM Extensions” on page 186
• ”Stopping the CIM Extension” on page 189
• ”Rolling Over the Logs” on page 190
• ”Removing the CIM Extension from Red Hat or SUSE Linux” on page 190
NOTE: This chapter describes how to install and manage the CIM Extension directly on the host.
You can also install and manage CIM Extensions remotely. See ”Deploying and Managing CIM
Extensions” on page 149.
IMPORTANT: Make sure you have reviewed the table, Table 2 on page 1 in the Overview chapter
to ensure you are at the correct step.
About the CIM Extension for Red Hat
Linux Advanced Server and SUSE Linux
The CIM Extension for Red Hat and SUSE Linux gathers information from the operating system and
host bus adapters. It then makes the information available to the management server.
IMPORTANT: Install the CIM Extension on each host you want the management server to manage.
The CIM Extension communicates with an HBA by using the Host Bus Adapter Application
Programming Interface (HBAAPI) created by the Storage Network Industry Association (SNIA). The
management server only supports communication with HBAs that are compliant with the HBA API.
For more information about the HBA API, see the following Web page at the SNIA Web site:
http://www.snia.org/tech_activities/hba_api/
Prerequisites